Formation of single-bonded (C60-)2 and (C70-)2 dimers in crystalline ionic complexes of fullerenes

New ionic complexes of fullerenes C(60) and C(70) with decamethylchromocene Cp*(2)Cr.C60.(C(6)H(4)Cl(2))(2) (1), Cp*(2)Cr.C60.(C(6)H(6))(2) (2); the multicomponent complex of (Cs(+))(C70-) with cyclotriveratrylene CTV.(Cs)(2).(C70)(2).(DMF)(7).(C(6)H(6))(0.75) (3); bis(benzene)chromium Cr(C(6)H(6))(2).C60.(C(6)H(4)Cl(2))(0.7) (4), Cr(C(6)H(6))(2).C60.C(6)H(5)CN (5), Cr(C(6)H(6))(2).C70.C(6)H(4)Cl(2) (6), Cr(C(6)H(6))(2).C60 (7); cobaltocene Cp(2)Co.C60.C(6)H(4)Cl(2) (8), Cp(2)Co.C70.(C(6)H(4)Cl(2))(0.5) (9); and cesium Cs.C70.(DMF)(5) (10) have been obtained. The complexes have been characterized by the elemental analysis, IR-, UV-vis-NIR spectroscopy, EPR and SQUID measurements. It is shown that C(60)(.-) exists as a single-bonded diamagnetic (C60-)2 dimer in 1, 2, 4, 5, and 8 at low temperatures (1.9-250 K). The dimers dissociate above 160-250 K depending on donor and solvent molecules involved in the complex. C60(.-) dimerizes reversibly and shows a small hysteresis (<2 K) at slow cooling and heating rates. The single-bonded diamagnetic (C70-)2 dimers are also formed in 6, 9, and 10 and begin to dissociate only above 250-360 K. The IR and UV-vis-NIR spectra of sigma-bonded negatively charged fullerenes are presented.     

Adsorption of anti-human IgG to plasma-polymerized allylamine film formed on a silver plate

Increase in the sensitivity of an immunosensor or biosensor requires the immobilization of a large amount of proteins. Good materials must be developed for this protein adsorption. Allylamine thin film was formed on a flat silver plate by plasma polymerization; this plate is referred to as Ag(ALAM). Ag(ALAM) films were characterized by SEM, FT–IR and ESCA. Investigations on adsorption and desorption of F(ab')₂ anti-human IgG (hIgG) on to Ag and Ag(ALAM) revealed the following: (1) The adsorption isotherm of F(ab')₂ anti-hIgG on to AG(ALAM) or Ag was of a Langmuir type. The binding constant (K_b) and saturation binding (A_b) for this protein on to Ag(ALAM) were 8.93 l/mol and 181.8 nmol/m², respectively, and for Ag, were 7.71 l/mole and 87.9 nmol/m². (2) The extent of desorption of labeled F(ab')₂ anti-hIgG absorbed on the two plates was the same. (3) Ag(ALAM) and Ag were used as solid phases in a two-site immunoradiometric assay of human serum IgG. The dose-response on AG(ALAM) occurred at lower concentration, and was of greater magnitude than that on Ag.     

Neutral and ionic complexes of C60 with metal dibenzyldithiocarbamates. Reversible dimerization of C60*- in ionic multicomponent complex [Cr(I)(C6H6)2*+].(C60*-).0.5[Pd(dbdtc)2

New molecular complexes of C60 with metal(II) dibenzyldithiocarbamates, M(dbdtc)2.C60.0.5(C6H5Cl), where M=Cu(II), Ni(II), Pd(II), and Pt(II) and an ionic multicomponent complex [Cr(I)(C6H6)2*+].(C60*-).0.5[Pd(dbdtc)2] (Cr(C6H6)2: bis(benzene)chromium) were obtained. According to IR, UV-visible-NIR, and EPR spectra, involve neutral components, whereas 5 comprises neutral Pd(dbdtc)2 and C60*- and Cr(I)(C6H6)2*+ radical ions. The crystal structure of at 90 K reveals strongly puckered fullerene layers alternating with those composed of Pd(dbdtc)2. The Cr(I)(C6H6)2*+ radical cations are arranged between the layers. Fullerene radical anions form pairs within the layer with an interfullerene C...C contact of 3.092(2) A, indicating their monomeric state at 90 K. This contact is essentially shorter than the sum of van der Waals radii of two carbon atoms, and consequently, C60*- can dimerize. According to SQUID and EPR, single-bonded diamagnetic (C60-)2 dimers form in below 150-130 K on slow cooling and dissociate above 150-170 K on heating. The hysteresis was estimated to be 20 K. For the (C60-)2 dimers in, the dissociation temperature is the lowest among those for ionic complexes of C60 (160-250 K). Fast cooling of the crystals within 10 min from room temperature down to 100 K shifts dimerization temperatures to lower than 60 K. This shift is responsible for the retention of a monomeric phase of at 90 K in the X-ray diffraction experiment.     

Interlayer interaction of two-dimensional layered spin crossover complexes [FeIIH3L(Me)][FeIIL(Me)]X (X-=ClO4-, BF4-, PF6-, AsF6-, and SbF6-; H3L(Me)=tris[2-(((2-methylimidazol-4-yl)methylidene)amino)ethyl]amine)

A series of two-dimensional (2D) spin crossover complexes, [FeIIH3L(Me)][FeIIL(Me)]X (X-=ClO4-, BF4-, PF6-, AsF6-, SbF6-) 1-5, have been synthesized, where H3L(Me) denotes an hexadentate N6 tripodlike ligand containing three imidazole groups, tris[2-(((2-methylimidazol-4-yl)methylidene)amino)ethyl]amine. Compounds 1-5 exhibit a two-step (HS-[FeIIH3L(Me)](2+) + HS-[FeIIL(Me)]-) <--> (HS-[FeIIH3L(Me)](2+) + LS-[FeIIL(Me)]-) <--> (LS-[FeIIH3L(Me)](2+) + LS-[FeIIL(Me)]-) spin-transition. The crystal structure of [FeIIH3L(Me)][FeIIL(Me)]PF6 (3) was determined at 295, 200, and 100 K. The structure consists of homochiral extended 2D puckered sheets, in which the complementary [FeIIH3L(Me)](2+) and [FeIIL(Me)]- capped tripodlike components, linked together by imidazole-imidazolate hydrogen bonds, are alternately arrayed in an up-and-down mode. The Fe-N bond distances and angles revealed that the FeII sites of both constituting units are in the high-spin (HS) state at 295 K; at 200 K, the FeII sites of [FeIIH3L(Me)](2+) and [FeIIL(Me)]- are in the HS and low-spin (LS) states, respectively. The FeII sites of both constituting units are in the LS state at 100 K. The size of the counteranion affects significantly the intra- and interlayer interactions leading to modifications of the spin crossover behavior. The onset of the second spin-transition of the ClO4- (1) and BF4- (2) salts adjoins the first spin-transition, while a mixed (HS-[FeIIH3L(Me)](2+) + LS-[FeIIL(Me)]-) spin-state spans a temperature range as wide as 70 K for salts 3-5 with larger counteranions, PF6-, AsF6-, and SbF6-, respectively. Compounds 1 and 2 showed remarkable LIESST (light induced excited spin state trapping) and reverse-LIESST effects, whereas 3-5 showed no remarkable LIESST effect. The interlayer interaction due to the size of the counteranion is an important factor governing the spin crossover behavior and LIESST effect.     

Regiospecific functionalization of methyl C-H bonds of alkyl groups in reagents with heteroatom functionality

We report the regiospecific, rhodium-catalyzed borylation of saturated terminal C-H bonds in molecules with existing functionality. Moderate to good yields were obtained with the organic substrate in excess and as limiting reagent. The borylations of trialkylamines, protected alcohols, protected ketones, and fluoroalkanes occurred regiospecifically at the methyl group that is least sterically hindered. Reactions were also conducted that probed electronic effects on the alkyl borylation. These reactions showed that the borylation occurred preferentially at the methyl group that is most electron-deficient. Methods to conduct tandem borylation of C-H bonds and conversion of the resulting boronate esters to alcohols, alkylarenes, and alkyltrifluoroborates were also developed.     

Folding Dynamics of 10‐Residue β‐Hairpin Peptide Chignolin

Short peptides that fold into β‐hairpins are ideal model systems for investigating the mechanism of protein folding because their folding process shows dynamics typical of proteins. We performed folding, unfolding, and refolding molecular dynamics simulations (total of 2.7 μs) of the 10‐residue β‐hairpin peptide chignolin, which is the smallest β‐hairpin structure known to be stable in solution. Our results revealed the folding mechanism of chignolin, which comprises three steps. First, the folding begins with hydrophobic assembly. It brings the main chain together; subsequently, a nascent turn structure is formed. The second step is the conversion of the nascent turn into a tight turn structure along with interconversion of the hydrophobic packing and interstrand hydrogen bonds. Finally, the formation of the hydrogen‐bond network and the complete hydrophobic core as well as the arrangement of side‐chain–side‐chain interactions occur at approximately the same time. This three‐step mechanism appropriately interprets the folding process as involving a combination of previous inconsistent explanations of the folding mechanism of the β‐hairpin, that the first event of the folding is formation of hydrogen bonds and the second is that of the hydrophobic core, or vice versa.     

Polymers having stable radicals. I. Synthesis of nitroxyl polymers from 4-methacryloyl derivatives of 2,2,6,6-tetramethylpiperidine

Polymers having stable nitroxyl free radicals, poly-4-methacryloylamino- and poly-4-methacryloyloxy-2,2,6,6-tetramethylpiperidine-1-oxyls, were synthesized from their precursor polymers by oxidizing them in a methanolic solution of hydrogen peroxide. The precursor polymers were prepared by radical polymerization of 4-methacryloyl-amino/oxy-2,2,6,6-tetramethylpiperidines in various solvents. These polymerizations in acetic acid were found to yield polymers of high molecular weight. The copolymers of the precursor monomers with styrene and methyl methacrylate were also prepared as precursor copolymers. These precursor polymers of a piperidine type were converted to the polymers having stable nitroxyl free radicals by the hydrogen peroxide method. In this report, it was assumed that the post-oxidation reaction introduced a nitroxyl group smoothly and quantitatively at room temperature. Elucidations of the stable radical formation and the electron spin behavior of the stable radical polymers were made in terms of elemental analyses, infrared, ultraviolet, and ESR spectroscopy.     

Effect of molecular packing on adsorption and micelle formation of a homologous cationic surfactant mixture of hexadecyltrimethylammonium bromide and dodecyltrimethylammonium bromide

The surface tension of an aqueous solution of a hexadecyltrimethylammonium bromide (HTAB) and dodecyltrimethylammonium bromide (DTAB) mixture was measured as a function of the total molality and the composition of DTAB at 298.15 K under atmospheric pressure. The phase diagrams of adsorption and micelle formation were constructed and the excess Gibbs energy was evaluated by analyzing the phase diagrams thermodynamically. Both the excess Gibbs energy in the adsorbed film and the excess surface area are negative; therefore the mutual interaction between HTAB and DTAB is said to be stronger than that between the same species and is enhanced with increasing adsorption. By combining the results with those obtained in previous studies, we claimed that DTAB molecules can use effectively the space among the hydrocarbon chains of HTAB molecules and their polar head groups take a staggered arrangement at the surface so as to reduce the electrostatic repulsion. Consequently the dispersion force between hydrophobic chains becomes stronger. Furthermore, the comparison of the excess Gibbs energy in the adsorbed film with that in the micelle shows that the staggered arrangement of molecules is not necessary in the spherical micelle.     

Flame retardancy and heat resistance of phenol-biphenylene-type epoxy resin compound modified with benzoguanamine

The flame retardancy and heat resistance of a phenol-biphenylene-type epoxy resin compound, which forms a self-extinguishing network structure, were increased by the inclusion of a benzoguanamine-modified phenol biphenylene resin. The benzoguanamine-modified phenol biphenylene resin contains a benzoguanamine unit to release non-flammable nitrogen substances during ignition and to increase the resin's reactivity toward epoxy resins, and biphenylene units to keep the resin's thermal degradation and water resistance. The addition of the benzoguanamine-modified phenol biphenylene resin in the epoxy resin compound improved the epoxy resin compound's flame retardancy and heat resistance, and also increased its glass transition temperature while maintaining its water resistance and mechanical properties. Copyright © 2003 John Wiley & Sons, Ltd.     

Solvent extraction and spectrophotometric determination of palladium(II) with some nitrogen-containing heterocyclic hydrazones in the presence of chloride ions

Three terdentate hydrazones, all containing the 1-phthalazino grouping in the hydrazine moiety but differing in the heterocyclic substituent in the aldehyde moiety, have been used as analytical reagents for palladium(II), the optimal conditions for the extractive spectrophotometric determination of palladium(II) in the presence of chloride ions being deduced. These compounds are highly selective and sensitive reagents for palladium(II), since they are not extracted into chloroform from sulfuric acid solutions and do not react with other platinum group metals. The desirable spectral properties of the palladium(II) complex of benzothiazole-2-aldehyde-1-phthalazinohydrazone (BAPhH) have also been discussed with respect to preference of the C  N structural form in the heterocyclic ring on the aldehyde moiety of the ligand.